|
|
|
|
|
|
|
Do you want to be a better CNC'er in 37 Seconds? Get Better Tool Life, Surface Finish, and Material Removal Rates Fast. It's that easy. You can install and get results now. |
Thanks for joining the G-Wizard Beta Test!
G-Wizard runs on Windows, Mac's, and Linux machines since they all support Adobe Flash and Air. Now that we have your name and email, we'll be adding you to the registered user list for G-Wizard. If we don't get to it right away, don't worry. You have a 3-day grace period in which to get registered.
Click "Install Now" right below to install the latest version of GWizard on your computer:
Here's what is going to happen. Press the "Install Now" button on the image above. GWizard uses Adobe AIR (sort of like Flash but it lets you run GWizard as an app instead of from your browser), so the first thing it'll do is make sure you have AIR installed. Just follow the directions and the G-Wizard installer will take care of that automatically. If you already have AIR, it will move right along to installing GWizard. Tell it to go for it.
That's all there is to it. The Install will offer to run GWizard, or you can run it out of the directory you installed it to. If your G-Wizard is already up to date, and doesn't need a new version, it will tell you that too. There is never any harm in running the install as often as you'd like, but remember that G-Wizard tells you in the top right corner whether your current version is up to date or not.
After installing, the first thing you need to do is click the "Login" button at the top and give it your email. If you're not yet registered, it won't let you do much but use the Calculator page. As mentioned above, there is a 3-day grace period and then we should have registered your information. If not, drop us a line so we can fix it. You will also need to accept the end user license agreement (EULA) to enable the other functions. Lastly, registration is not complete unless you've responded to the opt-in request on the email we send right after registration. That opt-in registers you for our newsletter and it also registers for the beta, so don't ignore it!
If you're having problems, try the Troubleshooting Page.
As always, don't be shy. We want to hear any feedback you may have to help us improve G-Wizard. You'll also be receiving a couple of opt-in emails so you can be added to the Beta Test mailing list as well as the G-Wizard newsletter. You don't have to participate in those, but we strongly suggest you at least allow the Beta Test mailings so we can give you up-to-the-minute news of G-Wizard and the details of each new release.
Thanks again,
Bob Warfield
CNCCookbook
PS: Check out the G-Wizard User Guide links at the left to see documentation on G-Wizard. There's a lot going on there. Try playing with it a bit first if you like, but you'll want to see all the nifty tricks and features in the product by viewing the documentation at some point.
|
Do you want to be a better CNC'er in 37 Seconds? Get Better Tool Life, Surface Finish, and Material Removal Rates Fast. It's that easy. You can install and get results now.
|
||||||||||||||||||
| ||||||||||||||||||
