Transfer Screws and Transfer Punches are hugely useful around the shop. Whenever you have to duplicate holes from an existing part, they make the job easy. Transfer screws are literally threaded screws. You put them into the threaded hole or holes of the part, lay the part on a workpiece you want to duplicate hole location for, and tap the part with a mallet. The Transfer Screw has a sharpened point that will mark the workpiece with the location of that tip.
What could be easier when you want to transfer a hole location?
Make Your Own Transfer Screws
I own commeically made transfer screws in a number of small sizes, but it’s so easy to make larger ones that I don’t bother buying expensive premade transfer screws for the larger sizes.
Recently, I needed to make a cover plate for my IH mill to mount an oil pump and generally make it look nicer. To do that, I needed to put 4 holes in an aluminum plate that would line up properly with the holes in the column casting:
How to locate those 4 holes on my aluminum plate?
I could fuss around with calipers trying to get the hole locations right, but what a pain. Transfer screws make it easy. So let’s make a set of M8 transfer screws for this job!
Start with 4 M8 bolts and nuts….
I Loctite the nuts in place so they won’t come loose…
Set your lathe compound over for cutting a 60 degree angle. Feed each pass with the compound, and set the depth of cut with the other dial. As you get close, ease of the depth of cut!
Here’s one finished!
Pretty soon you have a set…
Put them in the 4 holes, hold the plate up, give it a tap, and you’ve located where to drill…
Like my funky Kant-Twist table clamp? Handy as heck. In this case, I avoided dragging out the big vise by clamping atop my little one…
It’s just that easy and just that fast…
Still need to countersink the mounting bolts and make a set of holes for the pump!
Like what you read on CNCCookbook?
Join 100,000+ CNC'ers! Get our latest blog posts delivered straight to your email inbox once a week for free. Plus, we’ll give you access to some great CNC reference materials including:
Our Big List of over 200 CNC Tips and Techniques
Our Free GCode Programming Basics Course
And more!
Just enter your name and email address below:
100% Privacy: We will never Spam you!
Rate this post
Recently updated on February 15th, 2023 at 02:44 pm
Bob is responsible for the development and implementation of the popular G-Wizard CNC Software. Bob is also the founder of CNCCookbook, the largest CNC-related blog on the Internet.
