CNCCookbook: Be a Better CNC'er

Do you want to be a better CNC'er in 37 Seconds?

Get Better Tool Life, Surface Finish, and Material Removal Rates Fast.

It's that easy. You can install and get results now.

The Best CNC Machining Books


Here are the 7 Best Books for CNC'ers that I know.

To get onto this list, the books had to pass the following tests:

  • Be one of my own personal favorites
  • Be highly rated on Amazon by at least 40 or so reviewers

I think the results of this will speak for themselves as these are excellent books that would be at home in the library of many a CNC’er.  Some are CNC Textbooks suitable for classes but they’re all excellent works.

Great CNC Programming Textbook

$55.24 on Amazon

Review Score: 4.6 out of 5.  83 reviews.

This book is the Bible of GCode Programming, and is probably the best textbook there is on GCode.  We do offer an excellent free G-Code Course, and if you added Smid’s book on top of that it’s hard to see how you wouldn’t have all the information  you could ever need about G-Code.

Tips and Techniques for CNC'ers

$43.54 on Amazon

Review Score: 4.5 out off 5.  67 reviews.

I love tips and tricks books.  They’re filled with bite-sized nuggets of information so you can get something of value by reading a short article rather than going cover to cover.  Machine Shop Trade Secrets was the first one of this kind I came across.  It’s a great book, but I like Lipton’s book better.  The tips just seem better and somehow there’s more value to take away.  At least that was my experience.  Ideally, buy both.  But if you have to choose, start with Lipton.

Pocket reference to Geometric Dimensioning & Tolerancing

$19 on Amazon

Review Score 4.3 out of 5.  74 reviews.

Geometric Dimensioning and Tolerancing?  Ugh!  For many, it’s a painful subject.  But once you learn how to deal with it, GD&T is not only useful, but critical for the professional CNC’er at some level.  There are whole textbooks available on the subject, but I like this little pocket guide.  Best of all, while it normally goes for much more, there seems to be a copy going for $19 on Amazon if you check carefully.

What is Machiner's Handbook good for?  Read here.

$68.38 on Amazon for the 29th Edition`

Review Score 4.2 out of 5. 205 reviews.

If you’ve been a CNC’er or Machinist for any length of time, you’ve already got a copy of Machiner’s Handbook.  If you’re a beginner, you need to get one now and stick it in your toolbox.  In some ways, I hate the think.  It is so dense I just about get a headache every time I need to pry some nugget of information out of it.  On the other hand, that same density means you hold a wealthy horde of the information in the palm of your hand.  Over time, I have minimized a lot of the stuff I was going back for the most often by moving it into G-Wizard’s reference data tabs, but there’s no way I’ll ever move everything out of Machinery’s Handbook and into our software.  So get one of these and keep it on hand as needed.

I am going to do one cheesy cheapskate thing and suggest you buy one edition older than the latest.  That’d be the 29th edition instead of the 30th.  Why?  Because you’ll save a bunch of money.  Most CNC’ers don’t buy the new ones every year.

Introduction to machining book.

$16.89 on Amazon

Review Score 3.2 out of 5.  100 reviews.

I get asked a lot to recommend books for folks that are rank beginners.  This is the book I like to put forward.  If you’ve run a lathe or mill, you won’t get much out of it.  But if you never have, it’ll help you put all the pieces together and get oriented.  Check it out!

Introduction to machining book.

$10.62 on Amazon

Review Score 4.1 out of 5.  52 reviews.

Same story as Briney’s Book–not that helpful if you’ve run a lathe, but wonderful if you haven’t.  Between these two books, you’ll have a very decent starting foundation as a Home Shop Machinist.

Tips and Techniques for CNC Machinists

$33.20 on Amazon

Review Score: 4 out of 5.  45 reviews.

Did I mention I like Tom Lipton’s writing?  Here’s more of it, and I’m so glad it made the list by virtue of enough reviews of sufficient quality on Amazon.


Be sure to check out G-Wizard!


Back to CNC Cookbook Central...



Featured Articles

Step-By-Step Guide to Making CNC Parts

CNC Router Cutter Types

Why Use a Single Flute Endmill?

Step and Servo Motor Sizing

The Truth About Tool Deflection

10 TIps for Router Aluminum Cutting

2 Tools for Calculating Cut Depth and Stepover

CNC Machine Hourly Rate Calculator

Special Purpose CNC Calculators

Feeds and Speeds Guide

CNC Cutter Guide

Feeds and Speeds By Material

G-Code Tutorial

  Feed Rate Calculator

Sales, and Special Deals


GCode is complicated.
G-Wizard Editor
makes it easy.

Try It!


Feeds and Speeds:
Made Easy.

Try G-Wizard



Do you want to be a better CNC'er in 37 Seconds?

Get Better Tool Life, Surface Finish, and Material Removal Rates Fast.

It's that easy. You can install and get results now.


Start Now, It's Free!